Find a product by name or code. Only reviewed English guides are shown here.
All Products
117 reviewed English products
QT10 · AdditivesFast DefoamerRapidly removes foam and provides lasting foam suppression with good levelling. Add 0.1%–1% to the mixture. The source lists edge paints, leather coatings, acrylics, water-based polyurethane, casein, polyvinyl alcohol and latex adhesives.View guide →
QT11 · AdditivesAnti-Mould TreatmentA mould-control additive used during cleaning, subsequent spraying and care. The source specifies 5%–10% during cleaning, then spraying inside and out after washing and adding to a feel modifier or resin during care.View guide →
QT12 · AdditivesWater & Stain RepellentSpray undiluted onto suitable suede, nubuck and textiles such as canvas shoes. Creates a breathable, water-shedding protective layer. Allow approximately 4 hours to dry naturally.View guide →
QT13 · AdditivesLeather Shaping AgentA ready-to-use water-based treatment that stiffens leather fibres for shaping. Spray or apply by hand to the reverse, using suitable shaping supports. Air-dry or dry at 50°C. Repeat 2–3 times if greater firmness is required.View guide →
QT14 · AdditivesLeather Fibre RelaxerA ready-to-use water-based treatment that loosens hardened leather fibres without relying on the heat and mechanical action normally associated with fatliquoring.View guide →
QT15 · AdditivesPattern Masking LiquidBefore colouring, use a fine brush to cover patterns that must retain their original colour.View guide →
QT16 · AdditivesLuxury Leather Logo Masking LiquidBrush carefully onto logos or lines and allow approximately 30 minutes to dry into a film before colouring. Protects the covered details from overspray.View guide →
QT17 · AdditivesLeather DegreaserDilute with hot water at 1:1 to 1:3 and spray onto oily areas. Leave for 10 minutes, then rinse with clean water and dry. On smooth and oil-waxed leather, spray directly; on suede, dampen first, apply and then clean using the appropriate suede method.View guide →
QT18 · AdditivesHeavy-Duty Oil RemoverA strong oil-removing treatment designed to minimise fading, hardening and darkening. Apply directly to oily areas before cleaning, or add to cleaner according to the severity of contamination.View guide →
QT19 · AdditivesRapid Oil Stain RemoverPenetrates oily stains on suede, nubuck, aniline leather, down garments and darkened bag handles. Apply locally with a cotton bud using a circular motion.View guide →
QT20 · AdditivesImported Metal Scratch Repair PolishA fine abrasive polish for scratches, fine marks, light oxidation and dullness on metal. Rub gently in circles with a soft cloth to restore a smooth, bright finish.View guide →
QT21 · AdditivesFabric Dye-Transfer Remover No. 1Dilute No. 1 with water at 1:1 to 1:3, then apply with a cotton bud and allow it to penetrate. If colour remains, spot-apply undiluted No. 2, wait 30 seconds and dry completely with warm air. The source permits repeating 2–3 times for severe transfer.View guide →